|
Marquee
Home theater is exciting! 
The Marquee is intended for use as a center channel speaker in home theater systems. It boasts three electrostatic panels which are angled to provide wide dispersion, along with two aluminum cone 6.5” bass drivers. The Marquee has true high end sound quality, and due to its extended low frequency response, it can be used as the front and rear speakers of a home theater system as well as doing service as a center channel speaker. The efficiency of the Marquee is surprisingly high.
MSRP: $2870 each
Specifications
| Frequency response |
45 Hz to ultra-sonics |
| Audio power (min/max) |
50/200 watts (music) |
| Sensitivity |
94 dB/1W/1m |
| Panel radiating area |
75 square inches |
| Low freq. drivers |
Two 6 1/2" diameter drivers are
used. The enclosure is
dual-slot ported |
| Crossover frequency |
950 Hz |
| Horizontal dispersion |
45 degrees (full spectrum) |
| Vertical dispersion |
20 degrees |
| Impedance (nominal) |
4 ohms |
| Bias power supply |
117/230 VAC, 50/60 Hz, 2 watts
If auto-bias is used no adjustment is necessary. |
Controls
High frequency
D.C. Bias |
4 positions in 3 dB steps
Continuously adjustable
If auto-bias is used connection to AC power is not necessary. |
| Height x Width x Depth |
9" x 35" x 12 1/2" |
| Weight |
48 pounds |
| Finishes |
Medium oak and black grille fabric is standard.
Other finishes and fabrics are available. |
| Input |
The speaker is bi-amp capable and has
dual input terminals. These come strapped for
single-amplifier use but the straps are easily removed
if desired. |
|
|
|
|
|
|
