Ultimate-1
Audiophile-1
Renaissance-3
Millennium-1
Millennium-2
Millennium-3
Dynastat
Marquee
Accessories

Millennium-2

Millenium-2The Millennium-2 is a truly full-range electrostatic loudspeaker. "So What?" you ask. What can a Millennium-2 do for me that other speakers can't do? This is a reasonable question when you are about to invest your money. It's our job to give a satisfactory answer. Perhaps, the most effective approach is to mention what reactions others have had to the Millennium-2. After listening to them, some have used objectives like: clean, crisp, undistorted, excellent imaging, very life-like, etc. Perhaps, the best summary was given by a well-known reviewer: "Never in my life have I lived with a speaker that has brought, and continues to bring, as much pleasure, excitement and satisfaction. In short, I am madly, passionately in love with their sound".
     What would cause listeners to make such glowing remarks? Technically speaking, the answer is simple. In part, it is due to the super-low mass of the membrane coupled with an iso-phasically applied driving force that evenly and uniformly moves every square inch of the membrane at the same time. Furthermore, there is only one transducing surface encompassing the entire audio spectrum, preserving the critical temporal relationships of the original music. More could be said about distributed resonance for enhancing bass response, the pure-copper charge diffusion ring for a more uniform charge distribution and faster charging, the optional toroidal audio transformers for superior acoustic resolution, the wide spectrally-uniform energy dispersion and many more technical advances that are only found in Sound Lab electrostatic transducers.
     We invite you to visit your local Sound Lab dealer and audition the Millennium-2. You will never view music production as before.

Specifications

Frequency response 30 Hz to ultrasonics
Audio power (min/max) 100/500 watts (music)
Radiating area 1688 square inches
Horizontal dispersion 75 degrees
Vertical dispersion Projected field height of speakers
Impedance (nominal) 8 ohms
Sensitivity Equivalent to 88 dB/1w/1m,
measured at 4 meters
Controls
Bass level
Mid-frequencies
High-frequencies
D.C. Bias

4 positions in 3 dB steps
4 positions in 3 dB steps
Continuously variable
Continuously variable
Height x Width x Depth 72" x 30.75" x
array: 9", base: 23.5"
Weight (per speaker) 140 pounds
Standard woods Oak
Other woods and painted finishes optional
Standard grille fabrics Black stretch-knit
Off-white linen
Black Spandex
Other fabrics optional
Accessories Tip-toes
Casters
Back wave attenuator (SALLIE)